|
Autoswitch
Brake Light Flasher by Rider WestNEW
BMR
Products Driving Light Mounts
Ducati Designs Headlight Upgrade
Electrical Connection
Extreme Taillights
EzyMount/
PIAA Kit
H3 High Beam Bulbs
H7 Low Beam Bulbs
Hella
Performance Ligting
Headlight
accents
Hyperlites
Just Bob's Running
Lights
Kisan Tech
PathBlazer/ TailBlazer
Kisan Tech
Vectra Lights
Lighting
Bolts
Lite Buddies/
Run-N-Lites
Martin
Fabrication Mounts
Motolights
Miscellaneous
Muth
Signal Mirrors
Phoenix Light
Switches (for BMW R1200 C)
Running
Lights and turn Signal Modifications
Saddlebag/Trunk/Extension
Light (by Rider West)NEW
Saddlebag
LED Lighting Kit (by Rider West)NEW
Street
TagZ
T & R Light Mounts
Wings
of Gold
ZZ-Technik Side Marker
Lights
Use the Autoswitch (tm) to eliminate
hanging a toggle switch under your car’s instrument panel
or drilling holes to put it on the dash. Great for motorcycles ATVs
because it’s even harder to find a good place to mount a switch.�
Our own Raffy is now a
Autoswitch dealer.�
Brake
Light Flasher
Easy-to-install braker light flasher
for the center brake light on the K1200LT trunk rack. It makes the
brake light flash rapidly for about two seconds, and then stay on
solid for as long as the brake is applied. The cycle repeats every
time the brake is applied. Can be purchased through our own Raffy.
These mounts are so tucked-away they
can hardly be seen in this picture. Mounted using existing side
panel screw locations they are able to support a variety of spotlight
configurations. Sold as a pair.
Ducati
Designs Headlight Upgrade
Ducati Designs
headlight upgrade for the K1200LT eliminates one of the weakest
features of this fine motorcycle, substandard lighting. Color-matched
assembly uses powerful H9 bulbs in DOT-approved Hella optical modules
and upgraded wiring to produce brilliant white, even illumination
both close-in and well down the road. Rugged design is guaranteed
to outlast your motorcycle and features a true plug-in design that
requires no modifications.
A source for many different electrical
gadgets such as the heated seat indicator light, power distribution
plate, turn signal conversion kit, and battery monitor.
Extreme
Taillights
By
upgrading to this kit you will be able to increase your night
time visibility. It's easy to install and makes the rear
taillight assembly appear brighter and more noticeable to all
behind you.
The Ezy-Mount brackets fasten under
existing hardware for a no-drill installation under the K1200LT's
oil cooler, and hold PIAA 1100X driving lamps safely over the stock
front fender. The Ezy-Mount provides full left/right and up/down
adjustment. The Ezy-Mount/PIAA 1100X kit can be ordered from CycleGadgets.com.�
The brackets alone can be ordered through Dallas
Motorcycle Accessories or CycleGadgets.com.�
An alternative source for all things PIAA can be found at Accessories
Connection (a PIAA dealer).� Photos of the kit can be found
here.
H3
High Beam Bulbs
PIAA, Hella, and many others make
H3 higher wattage bulbs.� Warning, there have been reports of damaged
headlight lenses when using higher wattage bulbs.
H7
Low Beam Bulbs
PIAA, Hella, and many others make
H7 higher wattage bulbs.� Warning, there have been reports of damaged
headlight lenses when using higher wattage bulbs.
Hella Performance Lighting
Hella,
Inc., offers some of the most advanced automotive lighting technology
in the world, from Xenon (HID) lamps to the revolutionary
Intelligent Lighting solutions. Raffy is
now a Hella dealer.
Headlight
accents
Turn your Headlight Parking light in to a dazzling
light show!
Why
just have plain parking lights when you can have "Headlight
Accents"? Turn the boring white parking light in an expression
of color.
A photo of the Hyperlites installed
on a K1200LT can be found here.
Just
Bob's Running Lights
Bob
Rasters has developed a kit to convert
your sidecase reflectors into real running lights.� A picture of
the installed running lights can be found here.�
You can also see Just Bob's Brake Light setup down in the Luggage
and Storage Section.
pathBlazer
headlamp modulator has the latest state-of-the
art "soft switch" switching technology. It conforms to the Federal
Standard 49 CFR Part 571.108
tailBlazer
operates by rapidly flashing the taillights
the instant you apply the brakes. The flash rate then slows down
to a steady ON - this cycle lasts about 4 seconds. This flash pattern
is called a Deceleration Warning.�
GET NOTICED ! The side view mirrors
are the widest points on your motorcycle.
vectraLIGHTS are mirror mounted to make you look larger than
life.
Lighting
Bolts
Increase
your night time visibility with these License plate 10 mm (Fish
Eye) LED Bolts...
In this "Kit" you will receive 2 10mm size LED's with
fish eye lenses!
Lite
Buddies/ Run-N-Lites
RUN-N-LITES
conversion kits illuminate the stock
turn signal housing with a low intensity light at all times. A high
intensity light flashes with actuation of the turn signal switch.�
K12LT
Light Mounts. Here is a sanitary,
easy to attach, mount for your PIAAs. A photo of the mounts installed
on a K1200LT can be found here.
Motolight� halogen riding lights
will provide you with a lighting edge at night, increasing your
visibility and looking great while doing it.� Photos of the Motolights
installed on a K1200LT can be found here.�
Our very own Raffy is
now a Motolights dealer.�
Other lighting options can be explored
here.
A common problem is drivers hanging
out in your "Blind Spot" - too far forward to see the lights on
the back of your bike. By bringing your turn signals up to the level
of your mirrors, you ensure that drivers riding too close to your
rear wheel can still see your signaling intentions. The high-intensity
LEDs in the Signal� Mirrors are aimed to provide the highest intensity
light slightly outward, so that drivers in your "blind spot" will
get the brightest light. The LEDs are visible from your perspective
in the rider's seat, but at a reduced brightness - enough to remind
you if you forget to cancel your signals, but not bright enough
to cause problems seeing in the mirrors at night when the signals
are on. Available from Muth Mirror
Systems, Dallas
Motorcycle Accessories, or CycleGadgets.com
Phoenix
Light Switches (for BMW R1200C)
BMW Part Numbers for the Phoenix
Switch Setup:
61
31 7 658 473 - switch (2 used)
61 31 7 660 444 - housing
65 14 7 651 032 - bolt
07 11 9 906 411 - bolt
46 63 2 313 281 - screw
More photos can be found here.
Running
Lights and turn Signal Modifications
Turn
your turn signals in to running lights on your K1200LT!
Add safety and security with this upgrade kit. Each kit comes with
complete instructions for installing the new sockets and bulbs in
your K1200LT.
Saddlebag/Trunk/Extension
Light
The
Saddlebag/Trunk/Extension Light contains six ultra-bright white
LEDs, and mounts with Velcro in either your saddlebags or your trunk.
It is supplied with a 15' wire so you could pull down the light
and use it anywhere around your bike. You can get them from our
own Raffy.
Saddlebag
LED Lighting Kit
This
kit contains all the parts necessary to convert your K1200LT saddlebag
reflectors into combination running lights and turn signals. The
kit includes two new reflectors (pre-wired with LEDs), double-sided
tape, wire, connectors, cable ties, and everything else you need
(except tools) to install the kit. You can get them from our own
Raffy.
Street
TagZ
Have
the look and the style with this classic designed License Plate.
With this device you can have it all, a scrolling marquee
of 118 characters. Add in the brake light feature of 161 LED's
going off for two seconds when you apply your brakes and you will
have all the toys in one product. Adds to your nighttime visibility
and messaging needs.
T&R
Mfg is introducing their new under-the-mirror
auxilliary light mounts. See them at Cycle
Gadgets.This new mount holds a set of PIAA 1100X lamps under
the mirrors. Installation involves
removing the wind deflectors, and replacing them with specially
machined brackets for the PIAA lamps. No permanent modifications
are made, so the entire process is reversible should you ever
wish to remove the lights.
Wings
of Gold
A
simple and elegant way of adding turn signals/hazard lights/running
lights to your K1200LT.
5 watt halogen bulbs fire up inside
a handsome cast aluminum housing that is finished in BMW silver
powder coat. Each bulb pours out 160 degrees of illumination from
your motorcycle.
|
