|
Escort Radar
Legal Speeding's
H.A.R.D.
Radar
Screamer
Valentine
W.A.R.D.
The New
Passport 8500 utilizes a totally new design, including a new
waveguide antenna, state-of-the-art microwave receiver, and our
latest proprietary software. The result is a remarkable increase
in sensitivity, including a blistering 200% improvement on the elusive
Superwide Ka-band, and complete immunity to VG2.� Sold by Escort
Radar's online store.
Passport 8500 Setup ( http://www.escortradar.com
)�
| Passport 8500 |
$299� |
| SmartCord-Direct
Wire� |
$29 (required if
you remote mount the V1)� |
|
| Total |
$328� |
Notes:�
SmartCord-Direct Wire will allow for remote mounting of the 8500
in the sidecase or topcase.�
Mounting Options:�
RCU Shelf (BMW
of Salt Lake/RCU Designs )�
RAM Mount (CycleGadgets.com
RAM Mounts )�
Remote mount in sidecase or topcase
Helmet Assisted Radar Detection (H.A.R.D.)
- Inside Helmet Visual Alert - Instead of a blaring speaker
or a faint light, H.A.R.D.provides an immediate visual alert: a
vivid LED light, inside the helmet that is illuminated within your
field of vision allowing immediate recognition of radar.� This product
is currently in development, but looked interesting enough to include
it.
Radar Screamer - Finally..... a way
for motorcyclists to hear radar detector warning signals without
uncomfortable earphones or helmet wiring.� Sold by motorcycleradar.com's
online store.
Valentine
One has a patented warning
system relying on both forward-and rearward-facing radar antennas
(front and rear laser sensors too). It goes beyond Ordinary Detectors
by telling you -- on every alert -- where to look, and how many
to look for. Once you have this intelligence report, you can easily
decide when to defend, and when you can simply shrug off a non-threatening
alarm.� Sold by Valentine One's online store.
V1 Setup (
http://www.valentine1.com )�
| Valentine One |
$399� |
| Remote Display |
$39 (required if
you remote mount the V1)� |
| Remote Audio� |
$49 (required if
you want audio interface)� |
|
| Total |
$487� |
Notes:�
If you are interfacing into a J&M system (i.e., BMW ComSystem),
you can send your V1 to J&M and they will install a 3.5mm audio
jack -- or you can do this yourself.�
Mounting Options:�
RCU Shelf (BMW
of Salt Lake/RCU Designs)�
RAM Mount (CycleGadgets.com
RAM Mounts)�
Remote mount in sidecase or topcase
|